主營產品：
品牌：臺灣固緯GWINSTEK、美國力科、臺灣艾德克斯ITECH、北京普源RIGOL、青島艾諾、美國FLUKE，臺灣華儀EEC、等等
產品涵蓋：直流電源供應器、交流電源供應器、電子負載、LCR測試儀、數字示波器、模擬示波器、信號發生器、絕緣耐壓測試儀、泄露電流測試儀、交流接地電阻測試儀、數字萬用表、頻率計、頻譜分析儀、交直流微電阻計、毫伏表、存儲記錄儀、超絕緣計/微電流計、電能質量分析儀、功率計、ATE測試系統，熱像儀，數據記錄儀等等
產品詳情
簡單介紹：
特點
輸出電壓范圍:80V/800V; 輸出功率: 400W & 800W
90度面板旋轉操作(機器可垂直或水平置放),節省桌面空間
多范圍定功率輸出設計
串并聯操作(*多提供2臺串聯 或 4臺并聯)
透過用戶接口可與PC進行聯機,提供序列編程功能
三組預設立即鍵(可進行常用參數的面板設置)
標準使用PC聯機接口: USB / RS-232 / 模擬控制接口
固緯PSB-2800LS可編程直流電源固緯PSB-2800LS可編程直流電源
詳情介紹：
PSB-2000系列是一款高功率密度, 可編程的多量程輸出的直流電源供應器。這個系列共有6個機型，其中包括1臺加載機。其輸出電壓范圍分別為80V及800V，而輸出功率分別為400W及800W。多量程輸出的功能允許在額定功率范圍內提供較高電壓和較大電流的靈活配置。PSB-2000系列可以串聯或是并聯的連接，以適用于更高電源輸出范圍的需求。PSB-2000系列提供三組預設功能鍵可儲存經常使用的電壓, 電流 和功率設定, 用戶可以快速的調用；序列編程功能，可以透過計算機定義由一連串的電壓和電流步進所組成的序列, 經由RS232C, USB接口或和選配的GPIB 接口去控制PSB-2000, 產生序列所定義的輸出電源,，此功能常被運用來建立標準的測試流程，以驗證待測物在操作條件快速變化時對特性的影響。
PSB-2000系列具有過電壓及過電流保護，當保護被觸發啟動時，電源供應器的輸出功能將被關閉，以保護待測物。當用來對電池充電時, Hi-Ω模式可以避免在充電過程中所產生的反向電流損壞電源供應器； PSB-2000 在背板所提供模擬監控與控制功能，可用來監控或控制其電源供應器的輸出。PSB-2000的面板可以90度的旋轉, 調整垂直或水平位置，達到理想的空間利用率。
固緯PSB-2800LS可編程直流電源| Model Number | PSB-2400L | PSB-2800L | PSB-2400L2 | PSB-2400H | PSB-2800H | PSB-2800LS |
| Output Rating | ||||||
| Channel Number | 1 | 1 | 2 | 1 | 1 | N/A |
| Voltage | 0~80V | 0~80V | 0~80V x2 | 0~800V | 0~800V | 80V |
| Current | 0~40A | 0~80A | 0~40A x2 | 0~3A | 0~6A | 80A |
| Output Power (Max) | 400W | 800W | 800W | 400W | 800W | 800W |
| Regulation (CV) | ||||||
| Load | 0.01% ± 3mV of rating voltage | 0.01% ± 30mV of rating voltage | N/A | |||
| Line | 0.01% ± 2mV of rating voltage | 0.01% ± 20mV of rating voltage | N/A | |||
| Regulation (CC) | ||||||
| Load | 0.02% ± 3mV of rating voltage | 0.05% ± 15mV of rating voltage | N/A | |||
| Line | 0.01% ± 2mV of rating voltage | 0.05% ± 10mV of rating voltage | N/A | |||
| Ripple & Noise (Noise Bandwaidth 20MHz, Ripple Bandwidth = 1MHz) | ||||||
| CV p-p | 90mV | 150mV | 90mV |
250mV (Only output voltage measures more than 1% of rated voltage) |
300mV (Only output voltage measures more than 1% of rated voltage) |
|
| CV rms | 4mV | 6mV | 4mV |
20mV (When current measures<2A) 35mV (When current measures>2A) |
25mV (When current measures<2A) 40mV (When current measures>2A) |
N/A |
| CC rms | 30mA | 60mA | 30mA | 15mA | 20mA | N/A |
| Programming Accuracy | ||||||
| Voltage | 0.1% setting ± 2digit | N/A | ||||
| Current | 0.2% setting ± 2digit | N/A | ||||
| Power | ±10W | ±10W (Only output voltage measures more than 1% of rated voltage) | N/A | |||
| Readback Accuracy | ||||||
| Voltage | 0.2% reading ± 2digit | 0.2% reading ± 2digit | N/A | |||
| Current | 0.3% reading ± 2digit | 0.3% reading ± 2digit | N/A | |||
| Power | 0.5% reading ± 2digit | 0.5% reading ± Vout x40Ma | N/A | |||
| Response Time | ||||||
| Raise Time (Full Load/No Load) | 50ms | 200ms | N/A | |||
| Fall Time (Full Load) | 100ms | 500ms | N/A | |||
| Fall Time (No Load) | 500ms | 1000ms | N/A | |||
|
Load Transient Rocover Time (Load change from 50 to 100%) |
1ms | 7ms | N/A | |||
| Programming Resolution | ||||||
| Voltage | 10mV | 100mV | N/A | |||
| Current | 10mA | 10mA | N/A | |||
| Power | 10W | 10W | N/A | |||
| Measurement Resolution | ||||||
| Voltage | 10mV | 100mV | N/A | |||
| Current | 10mA | 10mA | N/A | |||
| Power | 10W | 10W | N/A | |||
| Series and Parallel Capabitity (All number of units includes Master unit) | ||||||
| Series Operation | Up to 2 Units | N/A | N/A | For PSB-2800L only | ||
| Parallel Operation | Up to 4 Units | N/A | Up to 2 Units | |||
|
Perallel Operation with PSB-2800LS (Booster Unit) |
N/A | Up to 4 Units | N/A | N/A | N/A | |
| Protective Function | ||||||
| OVP (Fixed) | Output off with 110% of rating output voltage | Output off when output voltage exceed 110% of rated voltage | N/A | |||
| OVP (Variable) | Output off when operating Setting range: 1V ~ 84V with front panel | Presettable in range from 10V to 840V on front panel | ||||
| OCP (Fixed) | Output off with 110% of rating output current | Output off when output voltage exceed 110% of rated current | ||||
| OCP (Variable) | Output off when operating Setting range: 1A ~ 42A (84A for PSB-2800L) | Presettable in range from 0.1A to 6.30A on front panel | ||||
| OHP | Output off above heat sink setting temperature | Output off at the internal heat sink temperature | ||||
| Environment Condition | ||||||
| Operation Temp | 0oC to +40oC | N/A | ||||
| Storage Temp | -20oC to +70oC | |||||
| Operating Humidity | 30% RH to 80% RH (No dew condensation) | |||||
| Storage Humidity | 30% RH to 80% RH (No dew condensation) | |||||
| Other | ||||||
| Cooling method | Forced ait-cooling with fan moter | |||||
| Power consumption / factor | 560VA / 0.99 | 1120VA / 0.99 | 1120VA / 0.99 | 560VA / 0.99 | 1120VA / 0.99 | 1120VA / 0.99 |
| Inrush Current | 35A Max | 70A Max | 70A Max | 35A Max | 70A Max | 70A Max |
| Power Source | 100VAC ~ 240VAC, 50/60Hz, Single phase | |||||
| Interface (Standard) | RS-232C/USB | N/A | ||||
| Interface (Optional) | GPIB | N/A | ||||
| Analog Control | Yes | N/A | ||||
| Dimension | 210(W) x 124(H) x 290(D) mm | |||||
| Weight | Approx. 5kg | Approx. 7kg | Approx. 7kg | Approx. 5kg | Approx. 6kg | Approx. 7kg |
固緯PSB-2800LS可編程直流電源固緯PSB-2800LS可編程直流電源固緯PSB-2800LS可編程直流電源
